What To Do When A School Bus Catches Fire

Bus transportation is considered as one of the safest modes of transit for students. But, a fire resulting from a collision or failure of a component puts lives at risk and can have an enormous impact on operational costs as well.

There are diverse reasons that can cause fire in a school bus – due to mechanical failures, wires got loose and rub against engine parts, overload of circuit boards, explosion of tires or even leaks that release inflammatory fluids.

Read Also: 10 School Bus Pre-Trip Inspection Checklist

In most cases, school bus fires start in the engine area, running gear, or wheel area of the vehicle. Studies analyze that the most frequent cause of ignition was failure of equipment or heat source.

Along with transporting students safe to and from school, school bus drivers and attendees may have to handle even certain emergency situations such as a bus crash, accident or fire.

square-banner-new-1

In such a situation, they are responsible to supervise all students and follow procedures for the appropriate release of students

According to the U.S. government statistics, on an average – 379 school bus fires happen each year, though deaths are rare from such fire incidents.

Drivers in school bus must be well trained by the school district board to take immediate action, if they doubt any smoke or fire in any portion of the bus or even if the bus is near an existing fire and they are unable to move the bus away.

In such a scenario, take quick actions such as

  • Stop the bus in a safe area
  • Vacate the bus
  • Call Bus Dispatch number
  • Use fire extinguisher

Evacuate the bus

Organize students for a transfer to another school bus. School bus fire evacuation drills and training is important for drivers to rescue students from a burning bus.

Such drills can also help students to stay prepared in safely escaping from the bus. Students will be able to know when and how to evacuate as well as the relevance of evacuating in an orderly way.

Read Also: School Bus Transportation Security – 18 Practices to Follow

To evacuate the bus, drivers should –

  • Call for bus dispatch, shut off motor, set brake and remove key
  • Decide the right evacuation route, which ever you think is appropriate – let that be exit door, front or side doors, roof hatch or even windows.
  • Ensure that the attendees are helping students to get off safely and assemble everyone together
  • In case of time shortage, instruct students to leave their bags and other personal belongings on the bus and make sure that everyone has left
  • Leave the bus only after all the students leave and remember to take your cell phone as well as the first aid kit
  • Follow the correct student release procedures and do not re-enter the bus until recommended by the authorities
  • Follow correct transfer procedures, in case if you are transferring students to another bus. Ask them to move to that bus in an orderly manner, drivers should stay alert until the transfer is complete.
  • Designate older students to help the young ones in evacuation

Use fire suppression systems

Fire suppression systems can help to extinguish fire immediately. Such advanced systems release a mist or powder to extinguish the fire, when the temperature reaches a certain level.

Installation and testing of such fire suppression systems in engine compartments is now getting mandatory in buses as well as coaches.

These systems –

  • Provide extra time for students with disabilities to leave the bus
  • Can put out fire for rear-engine buses, even before driver might be aware of the incident

Maintenance staff and supervisors should also undergo thorough training during installation of such systems.

Read Also: School Bus Drivers Training – 10 Tips For City Driving

School districts can take certain steps to prevent such incidents such as replacing old buses with new ones, either by purchasing them or by getting benefits from a lease program.

Drivers should be recommended to inspect their school buses daily before every trip, check for leaks and make sure that all exit doors open perfectly, making the bus ready for any such emergency situations.

10 School Bus Pre-Trip Inspection Checklist

Unlike other transportation fleets, school buses have an enlightening purpose that demands special care; for it is the wagon that the future of our kind travels every day.

So, it’s a crime to look at it recklessly. School buses are more of a classroom than a wagon, where pupils learn the rules of the roads lively as well. So, it is essential to keep it on the lines of rules all around.

Fortunately, our rules and regulations are very concerned about our young growing generation. The rigorous set of laws and practices could instill the importance of keeping the school buses fit and flair all the way.

Read Also: School Bus Drivers Training – 10 Tips For City Driving

As the teamwork ofmolded machines and parts, every vehicle will get wear and tear over time, no different are school buses. So, it is necessary to inspect the vehicles as many times as possible. Specifically, before heading for a trip with the children.

 Since we cannot forecast the condition and the life of machine parts, either we have to dare to meet any trials across the way,or we have to make sure our vehicle is fit enough for any terrain. Sadly, we cannot go with the former in the case of school buses.

Hence, a thorough pre-trip inspection can assure that the school bus is working and ensure a smooth and comfy journey for the kids all the way.

Improve-reputation-of-your-school-Bus-Service

Notably, it is the drivers who are the responsible hands for taking care of all about the wagons, and there is some list of factors that we have to check before a trip.

So, let’s check what the pre-trip inspection checklists for school bus are.

1. Body Inspection

There are chances of slack connections and broken shields and window panes, scratchy bumpers and shaded lamps, blurry paint on our school bus. Giving a glance across the body of the bus will help us to figure out the visible damages, dents,scratch on it.

Body inspection spans all the way around the bus including, the glossy mirrors, grills, window panes, tires, lamps, wipers, shields, wheel nuts, reflectors and whatever visible to our naked eye.

Moreover, it enables us to catch out any part that is not working properly. Just remember we cannot leave out anything at least.

2. Engine Check

It is more likely a full heart check-up, so it takes time and patience. The engine consists of numerous parts, so it needs an in-depth analysis to figure out issues hiding inside.

The whistling valves, tubes, wires, chamber, seals, caps, lube tanks, engine chamber, filters, plugs, radiator, battery, pistons, spark plugs, timing gears, conveyor, shafts, etc. involves in an engine check.

So, any of it hesitate to work with the others in abruptly, the whole system stop working. Moreover, there are many forms of issues that can arise in an engine.

Leaking oils, broken seals, settled grits, blocked vents are some of the common persistent problems occurs on the engine. Hence, we have to spare some moments to understand the exact issues going on the engine.

Plus, we have to have a conventional understanding of the variations about the sounds, vibrations, and unusual precipitations to find the problems intact.

3. Light and horn

Lightsare critical elements in school buses since it has to take cuts and turns more often. So, it is essential to look over the lights, indicators and tail lamps thoroughly. If it requires any repair or replacement, we have to point out it to the mechanic immediately.

The list of lights in a school bus is a bit higher than the common wagons, and each one in it shall maintain accurately. The connections, brightness, wiring also have to take into inspection before every trip.

The same actions have to be followed humbly on the horns as well. Importantly, we have to check the capacity of the battery, for these parts are relying on the battery vastly. Any unusualbehaviors should repair immediately before the journey.

4. Gears and pedals

When the engine propels the pistons and shafts vigorously,and the gears, levers,andpedals failed to transport it to wheels, everything goes in vain. Hence, the prominence of gears and pedals are not less to any other parts.

To avoid unexpected troubles during the trips, we have to inspect the gears, brake, and clutch and accelerate pedals regularly and have to repair and maintain it accurately. Remember always, “Prevention is better than cure.”

5. Lubrication

Lubrications are like a kind of unavoidable catalyst in vehicles machine operation. Probably, the drivers know how the wagons crave for it when they run short of lubricationeverytime. Hence, for the proper functioning of machine parts and longer life of vehicles, it is essential far and wide.

So, we have to check all parts that require ample amount of lubrication across the vehicle. Primarily, for the moving pedals, rotating joints, and shafts, steeringcolumns,and attachments, etc.

Read Also: How School Bus Drivers Can Help Protect Disabled Children

Moreover, the lubricants that we use for the buses also matter to tap the efficiency of vehicles. So, always keep an eye over the parts and thevarieties of oils we chose to apply.

6. Emergency and Safety Equipment’s

The safety of school bus is an imperative factor of concern. Since we cannot foretell the things ahead in our roads, every school bus must equip with all safety and emergency measures to handle any situation seamlessly. Also, the driver and other vehicle staffs have to train to operate the equipmentquite well either.

Before every trip, checking the emergency and safety kit is a worthy practice. The fire extinguishers, first aid box, warning hazard triangles, spare parts, and emergency exit door and other essential safety measures that are acting up irregular and suspicious have to be replaced appropriately.

7. Meters and Gauges

Meters and Gauges are vital counterparts in all vehicles. The fuel levels, temperature, pressure, and speed are measured by the meters and gauges that are fixed on the driver panel. Hence, it is necessary to keep it up for conscious driving.

Any defect on it can cause massive misconceptions and disrupt the safe driving. So, always remember to check the working of meters and gauges accurately. Also, carryout the recommended repair/replacement timely.

8. Wheels

These tubular synthesized rubber rolls have a prominent role in running a vehicle. Wheels are the strong legs that help the vehicles run, walk and stand still.

Hence, a defect on it can bring big troubles on a trip. The air pressure level, thread thickness, disk condition, lug nuts are the factors that has to be looked over every day. Also, wheels and tires need to replace at proper intervals for a seamless drive.

9. Brake System

Inspecting brake involves various steps. For that, we have to take multiple testing rides as well. The oil, brake chamber, pedal, air lines, seals are few of them. The chances of brake system get into defect is more high, since it is the bridle of our gigantic wagon.

School-Transport-Software--Ensure-enhanced-student-safety

Thus, we have to ensure that the brake system is fit enough to control the bus all around. Regardless of the climate, terrain it could control the vehicle all around.

10. Documents and papers

Vehicle documents including insurance policies, registration and permits, test results, driver license,and other eligibility docs are to be updated as it expires. Over every trip, we have to check the documents twice to assure all papers are valid to the data.

Therefore, inevitableis the pre-trip inspection on school buses. To ensure a safe and secure trip for the children we have to pay our diligent attention throughout the school buses. From the number ofplates to the exhaust pipe, all the standards and recommendations have to adhere.

Read Also: School Bus Driver Safety – How Technology Can Play a Role

There are numerous factors still remaining for our attention in school buses.  However, we have covered almost every vital point to look over for a pre-trip inspection. Following these tips can help you keep unnecessary troubles far away from your fleets on the roads.

Wish you a safe trip.

8 Road Safety Tips For Pedestrians

Pedestrians also have the responsibility to follow certain traffic rules while on road. Your behaviour should not be the reason for any casualty. Try to be more attentive to your surroundings and follow the rules, as pedestrians your eyes and ears are your best tools for keeping you safe.

HERE ARE FEW TIPS YOU CAN FOLLOW AS PEDESTRIAN

  • Don’t jaywalk
  • Use sidewalks as much as possible, if not walk facing the traffic signal to know your surroundings
  • Mind the signs and signals
  • Use pedestrian crossings to cross the road
  • Before crossing the road look both sides to make sure there aren’t any vehicles
  • While on road do not text, play or hear music. Avoid distractions as much as possible
  • When you’re with children try to make sure they are not walking by the side of the road. Always maintain 3 feet distance from the road
  • During harsh weathers or at night, try to wear light coloured clothing so that you are visible.
Road Safety Tips For Pedestrians

How Safe Is Your School Bus ?

How safe is your school bus is a question that comes to everybody’s mind at the start of each school year. This can be attributed to the several high-profile school bus accidents that have taken place in the past.

According to safety administration authority, the safest way of transporting children to and from the school is the school bus. In fact, a school bus is considered to be seven times safer compared to traveling either by car or van.

Bus Safety

Time and again people have raised the issue that school buses are not provided with seat belts to ensure the safety of children. On the other hand, seat belts have been compulsory for passenger cars ever since 1968. However, experts in the filed opine that they are not required on school buses.

According to them, seat belts have a key role to play in ensuring the safety of passengers in cars, but the design of school buses is different and a unique kind of a restraint system on buses works extremely well.

On the other hand, the small school buses are to be equipped with lap and/or lap plus shoulder belts at all of the specified seating positions.

This is because the weights and sizes of smaller school buses and vans are closer to that of passenger cars and mini trucks, it is essential to provide seat belts to ensure the safety of the occupants.

In addition, the chances of students getting to school safely are nearly 70 times higher when they take a school bus instead of commuting by car.

This is because school buses have to comply with a lot of regulatory stipulations compared to other vehicles that ply on the roads. Moreover, they are designed to provide a higher level of safety than other passenger vehicles and prevent crashes and injuries. Further, the stop-arm laws protect students from other motorists.

Another aspect is that school buses are designed in such a way that they ensure high levels of visibility. Other safety aspects include flashing red lights, protective seating, rollover protection, high crush standards, and cross-view mirrors in addition to stop-sign arms.

The school students are also further protected by law. The law prevents drivers from passing a school bus when students are being dropped off or picked up, irrespective of the direction from which he/she is approaching.

Bus Stop Safety

It is not riding the bus that poses the greatest risk to the school students. The risk is higher when approaching or leaving the bus. Prior to going back to school or starting school for the very first time, the parents and children must have a clear idea of the traffic safety rules.

Parents must teach their children to follow all road rules and safe practices so that waiting for school bus at bus stops becomes safer for them. 

Children must reach the bus stop from where they board their school bus at least 5 minutes prior to the scheduled arrival time of the bus. Parents can visit the school bus stop and show the children where they wait to safely board the bus.

Children should wait at least six feet or three giant steps away from the curb. Children should also be told clearly that they should not run around or play when waiting for the school bus.

When it comes to boarding or getting down from the school bus, children should be taught to be patient, until the door gets opened, and the driver announces that they can board or get down at the bus stop.

Children should also be taught to hold the handrails so that they don’t fall down while boarding or alighting from the bus.

Children should never be allowed to walk behind the school bus. If a child has to cross the street to board the bus, he/she should be trained to walk on the sidewalk or along the street on the side to a point which is at least 10 feet or 5 giant steps in front of the school bus prior to crossing the street.

It is also important that children make an eye contact with the school bus driver prior to crossing the street in order to make sure that the driver has seen him/her. At times children might drop a book or a ball near their school bus but they should never try to pick them up.

This is because the driver may not be able to see them. The safest thing to do in such a situation is to inform the bus driver.

On their part, school bus drivers can take care of a few things to make school bus travel safer for children. When backing the bus out of driveways or leaving garages, they must keep a watch on children that are bicycling or walking to school.

The same rule applies when driving the bus around the neighbourhoods within school zones. Drivers should watch out for children walking or cycling to school.

It pays to slow down the bus and watch out for children that are walking on the street, especially if the neighbourhood does not have any sidewalks.

They should also be aware of children congregating and playing near school bus stops. Drivers should also be vigilant as children that arrive late might run on to the street unaware of the traffic.

In addition, drivers must be aware of the school bus laws in their state and obey them. This includes the use of the flashing light signal system for alerting motorists.

Flashing yellow lights indicate that the school bus is going to stop either to enable the children to board the bus or alight from the bus. This is a warning for the other motorists to either slow down or prepare for stopping their vehicles.

When the red lights are flashing and the stop arm is extended, other motorists understand that the school bus has been stopped for children to either get into or get off the bus.

Motorists will immediately stop their vehicles and continue to wait until the driver puts off the flashing red lights and withdraws the extended stop-arm.

The school bus starts moving even before other motorists start driving their vehicles again. Further, refresher training courses are available for school bus drivers to ensure the safety of children during the school year.

It is not an easy decision for parents to allow their children to travel to and from school on the school bus. However, it is important that they keep in mind the fact that, even without seat belts, a school bus that operates as per regulations is the safest option for school children.

15 School Bus Safety Ideas You Can Share With Everyone

Safety begins at home. All in an attempt for everyone concerned to ensure that students reach their destination safe and sound, parents should play a major role.

They should do their bit in educating kids about safety rules that need to be followed by their wards. Additionally, life with its uncertainties in the form of an unforeseen eventuality caused by an errant motorist may cause a road accident involving a school bus.

For the sake of informing everyone about the safety parameters concerning school buses plying on roads, here are 15 safety tips that are categorized under the heads of those meant for parents and those that are given out to motorists on the road.

Firstly, let us look at the 8-fold safety tips that parents should teach their school-going kids so as to ensure that every school trip is safe. These pointers should then be made public for everyone to pay heed and implement.

Tip 1 : A Yellow Signal Indicates That the Bus is About to Halt: It is the prime responsibility of the parents to educate their wards about the safety signals of school buses. One such explanation concerns the flashing of yellow lights on a school bus. Parents should teach their kids that blinking yellow lights indicate that the bus is preparing to halt.

Tip 2 : Escort Young Kids to Their School Bus Stops: Parents of young kids should always escort them to the pickup points and wait for their return at their designated drop points.

Tip3 : Give Clear Drop Point Instructions to Kids: Elder kids who need not always be accompanied to bus stops should be informed about the safest route to reach home. Parents should insist that their kids who get dropped at their bus stop should either head straight to their doorstep or to the normal after-school destination they are ordained to reach.

Tip 4 : Caregivers to Step In, Filling In for Parents: In the event parents have a change of plan with regard to picking up their kids from the school bus stop, they should keep the caregiver informed about the new plan. Caregivers should then ensure that these kids are not left stranded on the road after getting dropped from their school bus. 

Tip 5 : Educate Kids about School Bus Safety Rules: Information is strength. In line with this adage, it is the duty of parents to educate their wards about the school bus safety rules. One important pointer that should be brought to the notice of kids is to avoid picking anything that has fallen down when they are boarding the bus. They should let their kids know that informing the bus driver about the fallen object can avoid accidents.

Tip 6 : Patience – A Virtue That Should Be Inculcated in Kids: Kids should be taught to patiently wait for the driver’s instruction to board the bus. Kids should wait for the driver’s instruction to cross the street and should avoid hurrying away from the bus after the bus comes to a halt at a drop point. Additionally, they should also be instructed to move away from the danger zone and to wait for the bus in a safe corner, away from the street.

Tip 7 : Better to Be Safe Than to Be Sorry: Parents should keep a watchful eye on what their kids wear and carry to school. In addition to avoide loosely hanging straps that can get caught to the doors, seats or handrails, school bags with strings not tied up should be avoided at all times.

Tip 8 : Good Conduct While Travelling in a School Bus: Parents should teach their kids that they should demonstrate a disciplined conduct while on board. In addition, they should din it in the minds of kids that misbehaving while travelling can lead to accidents. Distracting the attention of school bus drivers can lead to an unsafe environment, causing harm to all the students on board. Kids should also be taught to respect the instructions given out by the school bus driver with a belief that rules are meant for the safety of every student travelling.

Tip 9: Heeding to the Instructions of the School Bus Driver: Obedience is another trait that should be inculcated in kids, early on. While parents teach kids to obey their teachers  in class, they should also teach them to be obedient towards the school bus driver.  Secondly, Let us now move to the 6 safety tips that should be followed by motorists and proclaimed to everyone.

Tip 10: Rules are meant to be Followed: Motorists should always follow the rules specified by the government. The law  states that motorists should be watchful about school buses and should stop when they see a school bus either picking or dropping kids at their respective locations.

Tip 11: Keep An Eye on the School Bus Signals: Motorists should always look for the stop arm and red lights that flash when the school bus halts. These two signals suggest that they should completely halt their vehicles without seeing them as “proceed with caution” indicators.

Tip 12 : Safety Instructions to Vehicles Plying alongside School Buses: These safety tips are meant for vehicles which are plying on a divided roadway sharing the road with a school bus.

Tip 13 : Shed Light on the Consequences of Errant Drivers: People residing in rural areas should be educated about the seriousness of impatient or preoccupied drivers. Such drivers who do not spare a thought about school buses can injure the kids who are either boarding or alighting the school bus.

Tip 14 : The Significance of a Stop Signal: Motorists should bear in mind that a school bus stop signal is non-negotiable. Going against such a signal attracts a traffic ticket which can be avoided if they keep their eyes open to school bus signals.

Tip 15: Safety Instructions for Drivers and Pedestrians: It is not only for pedestrians to follow traffic rules. Drivers should also take care of  pedestrian traffic rules. All those riders who are in close range of the school bus stops and the school premises should be very vigilent at all times. They should completely halt their vehicles when they see a school bus either picking up or dropping students.

Closing Thoughts:

All the above-mentioned school bus safety tips should periodically be reviewed thoroughly. Once these tips are made public to everyone concerned about the security of school students, safety will be ensured.

In this way, every school bus trip will become a safe ride for kids to enjoy and for parents to be rest-assured. In addition to stay safe while boarding the bus, kids should be taught to maintain seating discipline and follow instructions of how to get down the bus.

Motorists who make their presence felt on roads are also expected to be watchful about school buses plying with many students.

20 Ways to Introduce School Bus Safety

School buses are the safest mode of transportation for students to travel to and from their schools. The safety of school buses starts with recruiting qualified drivers and offering them the required training on traffic regulations and on handling the buses safely. School districts should make them understand their responsibility in transporting the school students safely to and from their schools.

Drivers also play an important role in ensuring school bus safety. So while choosing school bus driver, you must be very careful and selective. This is the most vital factor that every school district is supposed to consider while focusing on their school bus safety.

Here are the other 20 ways that a school management can focus on improving the safety of their school buses.

1. Speed Restriction

The transportation division of every school should instruct their drivers not to drive their school bus beyond the specified speed limit. This can be monitored easily by installing a GPS tracking system on their school buses.

2. Unoccupied back seats

If possible, the last two seat rows at the back of the bus can be made empty. This will keep kids free of wounds due to back collisions.

3. Three-Bus Rule

This means that the bus attendant should allow three students at a time for boarding their buses. This practice is particularly important at traffic-prone bus stops. This is because kids are more susceptible to be wounded while getting in and getting out of bus in these areas.

5. Signal

School bus drivers are supposed to signal school kids when the time is safe and suitable for them to cross the road while boarding their buses. Parents should also educate their kids on crossing the road safety.

6. Turning Techniques

School administration should educate their drivers on handling their buses safely during the bends to avoid kids falling down from their seats. This will also prevent the bus from knocking down the oncoming vehicles.

7. Clean floor

School districts should emphasize their bus drivers to keep the floor of the bus clean. This will prevent kids from skidding and being wounded.

8. Seating

Both bus attendants and drivers should ensure that the school kids are appropriately seated. This means that they should check that no part of the kids’ body is projecting the seating aisle.

9. Safe bus stops

School bus drivers have to take utmost care in bus stops where no cars or other vehicles are parked. This can be hazardous not only for students but also for drivers.

10. Distraction

The maximum safety of school bus mainly counts on continuing focused and staying away from disruptions. If students come across any problems in the bus, the driver should first resolve those problems to avoid unnecessary distractions while driving the bus.

12. Safety rules

Communicating the school bus regulations with kids, particularly new occupants, is the key to preserve an organized, safe setting on and around the school bus.

13. School bus backing

School bus drivers should take utmost care while backing their buses. If necessary, they should examine the road in front for any condition that might cause them to back. This can avoid accidental clash with the vehicle standing behind their school bus.

14. Escorting kids

School bus students are more susceptible when they are outside the bus, mostly when they have to cross the road. In such cases, school bus attendants or drivers should escort kids across the road to ensure safety.

15. Driver responsibility

Drivers should drive their school buses with the maximum responsibility. They should communicate with their transport manager whenever there are changes in the road or bus stops. 

16. Tipping the drivers

School administrators are supposed to offer useful and helpful tips to their drivers every morning on driving their buses safely. This will remind them about overall school bus safety.

17. Bullying

Bullying is one of the things happens in the school bus. This is because school kids are more vulnerable to bullying when they are in the bus rather than outside. So, to avoid these, school districts should educate bus staff on how to handle these situations in a well manner.

18. Bus check

Both the attendants and drivers should check their school bus whether any kid is still inside the bus after the completion of trip. Therefore, the best way to avoid this problem is marking attendance of kids when they enter and exit their bus.

19. Safety Vests

School management should instruct the school bus drivers and attendants to wear the reflective security vests. This will allow them to perk up protection in school bus lots.

20. Evacuation training

School administration should offer necessary training to their school bus students on the way to evacuate their school buses if any untoward incident happens. This is important for the elementary level students.

An Ultimate Guide to the School Bus Safety Rules

School bus safety rules ensures the safety and security of school bus students. Nevertheless, the parents will be concerned once they send their child to school bus unattended. Meanwhile, the school bus safety practices not only provide an assurance to parents, but also safeguard the kids from possible peril that encounters them in the absence of their parents.

Consider the following list of rules that assists you to ensure student safety inside a school bus:

Rules for Boarding the School Bus Safely

  • First and foremost, try to reach the bus stop at least 5 minutes prior to the arrival time of a school bus. Do not sprint towards the school bus
  • Wait at the predetermined stop in a secured place, away from the road side
  • Never stand in the danger zone of the school bus
  • Board only when the school bus stops completely. Ensure that school bus extend its stopping arms and the red lights are flashing
  • Cross the road only when the driver exhibits the apt signal
  • Utilize the handrail while boarding the school bus

Rules for Riding the School Bus Safely

  • Be seated, facing forward and don’t create commotion in a moving bus
  • Place bags and parcels under your seat or on the rack
  • Clear the bus aisle all times
  • Head, hands, and arms should be kept inside the school bus
  • Never attempt to propel items inside or outside the bus
  • Speak softly, don’t hoot or scream inside the bus and never engage in fights
  • Remain hushed while approaching the railway crossing
  • Participate in the school bus evacuation procedures
  • Never use abusive language inside the school bus
  • Do not carry hazardous objects in a school bus
  • Maintain cleanliness in a school bus, eating and drinking is not permitted on the bus
  • Respect the health of fellow passengers and school bus drivers, do not utilize allergic objects
  • Smoking is not allowed inside or near the school bus premises
  • Heed the instructions of school bus drivers

Rules for Descending the School Bus Safely

  • Remain seated until the school bus stops completely
  • Remember to hold the handrail while descending the school bus
  • Walk at least 10 steps away from the school bus and cross the road only when the apt signal is given by the drivers
  • Cross and proceed only after confirming that both ways are clear
  • Don’t rush while descending the school bus, the people in front leave first
  • Never pick the dropped items without the permission of a school bus driver

Aware of the Danger Zone

  • Aware of the 10 giant step rule, where the children will be able to recognize the danger zone around the school bus, especially while crossing in front of the bus
  • Before entering the danger zone, seek the driver’s permission
  • Interpret that a child is within the danger zone, if he or she is able to touch the school bus
  • Always remember the fact that if the driver can’t see the bus driver, you will also be not seen by them
  • Ensure that you have driver’s attention while crossing the road
  • Never play around or near the school bus transportation

Bus Stop Safety Tips

  • Reach the designated bus stop 8-10 minutes prior to school bus arrival time
  • Stand at least 10 feet away from the curb and form a queue away from the street
  • Ensure that the school bus has stopped completely and driver thumbs up, indicating that it’s all right to board the school bus
  • If there is a need to cross the street in front of the school bus, follow this procedure vigilantly- walk on the sidewalk, maintain a giant 10 feet distance, and assure that the driver can see you properly
  • Avoid unfortunate falls by holding the handrails tightly. Be cautious of your belongings or clothes, having straps or drawstrings, as there is a chance to become trapped in the sharp edges of school buses
  • Never walk and run behind or towards the school bus
  • Seek the permission of driver before picking a dropped item near the school bus

Bus Routing Details

School bus students should wait only on the designated bus stops, never modify it without the permission of relevant authorities. Moreover, ensure that you procure a written permit for altering your current bus stop or route.

Role of Parents

  • Ascertain the relevance of your role in ensuring the safety of your child
  • Convince the importance of safety rules to your child and compel them to follow the  essential safety rules
  • Assist them in arranging their objects in their backpack and never delay them
  • Insist them not to drop objects near a school bus or while riding a school bus
  • Initiate a decent rapport with the school bus drivers and obtain the contact details of school transportation authorities
  • Check the updates in the parent app routinely

Essential Requirements of School Bus Drivers

  • Aware of the legal requirements for becoming a school bus driver- ensure that the driver obtain 20-40 hours of specialized training, cleared written exams, and road tests
  • Inspect the driving records and subject to medical examination
  • Complete certified driver improvement courses, receive a general awareness on general traffic laws, and safety procedures
  • Commit the periodic inspection that provide an awareness to drivers regarding the board requirements

Furthermore, all the above rules are established for solving the safety and security concern of school bus students (FYI – the rules will be updated every year based on the specification, and hence stay for further updates).

Why Teach the Basic Principles of Road Safety to Kids

Road safety is of great importance and it is essential for the healthy development of children. Children are most vulnerable to road accidents and injuries. This occurs due to lack of guidance and supervision by adults.

School transportation service is a strategic solution to issues related to student transportation. Even though school transportation is said to be safer, it is our responsibility to teach them the basic principles of road safety. Proper guidance should be given at the right time.

Why is Teaching Safety Rules Important?

Teaching road and school bus safety rules to children are important because of certain reasons. The behaviour of children is unpredictable. Hence, it is impossible to know exactly what they will do when they confront traffic.

Children are smaller and hence it is difficult for drivers to see them. Children usually get frightens if they find any vehicle moving towards them. They freeze for a moment. This makes the situation worse.

Children might be unaware of the safety precautions they ought to take while crossing road. Even an empty street is not devoid of dangers. It's wholly the responsibility of adults to make them understand safety precautions that they must take.

Let’s begin with the most basic concepts that every child must know:

  • Explain what they must pay attention to and make them understand the consequences they face if they don’t
  • Teach basic rules while being pedestrian
  • Learn and obey traffic rules
  • Be careful  while walking through driveways and hidden or narrow passages
  • Be aware of the dangers of crossing between parked vehicles
  • Cross the road only through zebra crossings
  • Avoid running between cars
  • Never walk behind any vehicles
  • Must look both ways before crossing the road

Children never think about vehicles once they get out of the classroom. Their eagerness often overrides their caution in traffic. Being physically smaller children are not easily seen by drivers hence they are more vulnerable to injuries. In this case, there are certain responsibilities for parents as well.

Here are some tips for parents to keep their children safely are:

  • Hold their hands while crossing the road
  • Make them wear conspicuous clothing
  • Choose the safest place to cross
  • Remind them to concentrate on the road as they may get distracted easily
  • Always use the zebra crossing, teach them too
  • Warn them to look out for cyclists or motorcyclists
  • Ask them to observe traffic carefully so that they could cross the road whenever you are not with them

The school bus is one of the safest modes of transportation for students. But accidents can occur even when the child is waiting for the bus.

Parents can ask their children not to play near the road while they are waiting for the bus. Always assure that the child is waiting at the allotted bus stop.

While getting off the bus give them certain advice: get off the bus without pushing; after getting off the bus try not to wait near the road; wait till the bus has driven past and thus can see the road properly.

Here are some tips for school bus drivers to keep their students safe:

  • Ensure children are away from the bus while picking up and dropping off them mainly before moving and while taking reverse
  • If the streets are lined with bushes and trees, then be careful about neighbourhood kids
  • Make sure the children are seated properly when the bus is running
  • Always teach children to not to make noise when driving in a railroad crossing to hear the train alerts
  • Ensure children don’t put heads, hands or any object outside the window

But not only parents and drivers are responsible, children are too responsible for their safety. They must obey certain things while going on a school bus.

Here are some school bus safety tips for children they must aware of:

  • Maintain a minimum distance from the bus until it stops and the driver indicates you to enter
  • Always make use of handrail while entering and exiting the bus
  • Keep aisles of the bus clear
  • Obey all the instructions given by the driver
  • Don’t wait for the bus in the street instead wait on the sidewalk

Whenever a child accident occurs, most of the time fault is with the child. This points us to the fact that teaching the basic principles of road safety is very much necessary. Hence, it is the responsibility of the parents and teachers to guide and supervise them appropriately.

Remember the fact: Saving a child is similar to saving a family