Gang-Rape Accused Tracked With GPS

 

Delhi Police on Saturday arrested a Meru cab driver involved in the gang rape of a woman in west Delhi. The 37-year-old victim identified the location of the vehicles at the spot. On the basis of Global Positioning System (GPS), a list of names as well as the address of Meru Cab drivers was provided.

“All of them were detained, and the accused was identified by the woman,” said a police officer. Within hours, other culprits were also tracked by the police. According to sources, the victim knew the accused. 

The woman claimed that she was forced into the cab and was gang-raped by five men on Friday. She was taken to a shop after allegedly driven around west Delhi

She was let off at 4:30 am on Friday after that her statement was recorded by a team from Paschim Vihar police station. Police contacted the Meru headquarters after she identified the vehicle.

Read Also: Women Safety with GPS: A fresh initiative by Government of Kerala

“They cooperated with the investigating team and provided a list of suspects within an hour,” the officer added.

According to Meru the ability to track the location of a cab in “real-time” through GPS technology helps to provide security during emergency.

The cab firm confirmed that the driver was employed only after background check. During questioning, the accused revealed that they did not expect the woman would approach the police. One of the accused had threatened that they would kill her and her children.

The women said that she was kidnapped in Sagarpur near Paschim Vihar and then they took her to a puncture repair shop in Peeragarhi and gang raped her.

From the spot where she was kidnapped the shop is about 15 kilometres away. The investigation team is now trying to find whether the five accused have attacked any other woman in the past. So far no criminal records have been emerged.

Source

Safety for Sale: Parents to Buy Safe School Ride for Children

 

For the safe transportation of children, majority of the school buses have installed CCTV cameras and GPS system. But safety doesn’t come for free. Parents have to pay Rs 200 extra per month as school bus fees.

The new buses have been implemented from August. In addition to the school bus fee which varies from Rs 950 to Rs 1,850 per month, 200 rupees will be charged extra. 

Depending on the routes, bus operators are charging Rs 750-Rs 1, 650 compared to the charges varied from Rs 600 to Rs 1,500, last year.  The school bus fees have been increased to 21 per cent by SBOA in April.

Read Also: Bus Safety Measures

The School Bus Owners’ Welfare Association decided to hike the fees claiming that the maintenance charge for the safety measures can cost more. President of the SBOA, Manjit Singh Saini, said, “The hike is reasonable, it should not bother the parents since we have spent over Rs 10,000 on each of the buses to install the cameras and GPS. Parents should know that this system has been implemented for the safety of their children. So, paying Rs 200 extra for their children’s safety is not a big deal.”

Most school bus operates are on contract since the responsibility of hiring lady attendants for the buses came to the private contractor. The contractor will pay only for the lady attendant salary.

Manjith confirmed that lady attendants have been hired for the school bus along with the installation of GPS and CCTV cameras.  He said that by August all the buses will be equipped with necessary safety measures.

School heads believe that even local buses need to install CCTV cameras and GPS system. They are of the opinion that auto rickshaws and the Tata Magic mini-vans must be immediately banned because they carry more than 10-15 children.

Read Also: School Buses under RTA Scanner

HS Mamik, chairperson of Vivek High School, Sector 38, said, “It is the responsibility of the administration to safeguard the local buses also by installing the CCTV cameras and the GPS system.”

Kamlesh Kumar, the director public instructions (Schools) said that women safety can be ensured only with the installation of CCTV cameras and GPS system in local buses.

Source

The Amazing Evolutional Story of GPS Tracking

To figure out their position on earth and navigate, people once depended on different ways that are quite unimaginable in this digital era. It must be astonishing for today’s generation to imagine that mariners relied on methods ranging from angular measurements to positioning of celestial bodies for calculating their location. Radionavigation was the first ever modern technique used in order to calculate the exact location.

GPS was initially prepared for military purpose, and then its service was extended to various fields. GPS has proved itself to be one among the smartest inventions ever made. Now GPS has found its way to even school buses for better service and safety.

The extent to which it is provides service to customers is indeed appreciable.

Read on through the remarkable evolution of GPS:

1957: SPUTNIK, the first man-made satellite was launched. William Guier and George Waeiffenbach, American Physicist monitored the emission of radio transmissions from Sputnik with the help of which they could locate its orbit and location.

1959: The first satellite navigation system was built by Navy, which was named TRANSIT. It was built in order to obtain the exact location of submarines. The system was introduced with six satellites which eventually grew to ten. The subs had to wait for hours to receive signals from satellites. The model paved way for the true GPS with continuous signalling from satellites in space.

1960: TRANSITwas successfully tested

1963: The Aerospace Corporation completed a study for the military that proposed a system of space satellites which sends signals continuously to receivers on the ground and could locate vehicles moving rapidly across the earth’s surface or in the air. The study laid out the GPS concept for the first time. Receivers in vehicles on the ground would derive a precise set of location coordinates by measuring the transmission times of radio signals from satellites.

1974: After having worked on GPS for past 11 years, the branches of military launched the first satellite called NAVSTAR.

1978-1985: In order to test the NAVSTAR System, military launched 11 more test satellites in to space, which was called “the GPS system”. To measure the transmission time, the satellites carried atomic clocks with them. Sensor design to detect the launch or detonation of nuclear devices was carried by some of the satellites starting from 1850.

1983: Korean Airflight 007 was shot down by Russians after it wandered in the Soviet airspace over the Kamchatka Peninsula. All 269 passengers and crew members were killed. In order to avoid similar situations in future, President Reagan ordered that all civilian commercials aircrafts must be equipped with GPS system. He believed that GPS could help in navigation and improve air safety to a great extent.

1985: Contracts for “airborne, shipboard and man-pack (portable)” GPS receivers were given to private companies by Government.

1989: The fully operational GPS satellite was launched by the Air Force after testing for years. After the Challenger disaster in 1986, the plan to launch the satellite on the Space Shuttle was changed. It was used in a Delta II rocket instead.

1990: Defence Department deliberately decreased the accuracy of the GPS system fearing that military adversaries might use GPS system for their advantage.

1994: With an eye on the future, FAA and Bill Clinton granted the worldwide airline industry to continue using the GPS system for free.

2000: The purposeful degradation of GPS which was implemented before the first Gulf War by the Defence Department was stopped. Overnight, GPS became ten times more accurate and powerful. Industries like fishing to forestry to freight management began to use it.

2001: Private companies began to introduce out personal GPS products as the GPS receiver technology got smaller and cheaper. In-car navigation devices from Tom Tom and Garvin were introduced.

2004: A new technology was introduced known as “assisted GPS”, which has been tested and developed. The new eminent technology allows phones to use cellular signal in combination with GPS signal in order to locate the user to within feet of their actual location.

2005: “Block II”, first new generation of GPS satellite was launched from Cape Canaveral. Signals were transmitted by the new breed on a second, dedicated civilian channel.

2009: The Government Accountability Office (GAO) issued a report warning that the $5.8 billion effort to upgrade the GPS satellites was so fraught with technical problems, cost overruns, and delays that some of the satellites could begin to fail in 2010.

2010-2011: Two new GPS satellites was launched by Air Force,  one in 2010 and one in 2011 which are meant to keep the constellation operable, until the next generation “Block III” satellites get launched in 2014. An additional civilian GPS signal as well as enhanced performance compared to the GPS service is expected from new Block III satellites.

2012:Air Force manages a constellation of 31 operational GPS satellites, plus three decommissioned satellites that can be reactivated if needed, at present. The constellation ensures the availability of at least 24 GPS satellites, 95% of the time. The next addition to the constellation, the GPS IIF-3 satellite will be launched on October 4 by the Air Force in to the space.

How Does GPS Vehicle Tracking Systems Work?

GPS were initially used for military purposes by the US Department of Defense. But nowadays its commercialization has opened up a new window of opportunities in the field of safety and security. Everyone with a hand held mobile device can be powered with a GPS tracking app. This has made it possible to track assets on the move. Together with an embedded RFID card (with the asset), ensuring safety and security has become easier and economical. It is this cost effectiveness and the ease of use that has made GPS tracking systems widely accepted.

What is GPS?

Before understanding how a GPS tracking system works, let’s find out what is GPS. GPS or Global positioning systems is a satellite based technology that helps to track precise location of vehicles, person or other assets and also to provide data at regular intervals. A GPS tracking system can collect data in the asset’s environment and relay the same to a remote server, where the data can be further analyzed. GPS coupled with an RFID tag can be very useful. An RFID uses radio frequency of short range to relay data.

Now, let’s see how it works.

            As mentioned before, GPS is a satellite based technology which uses a Global Navigation Satellite System (GNSS) network. It uses a microwave signal which is sent to the GPS device. It gives provision for both real-time and historical data recording. This is made possible by the 27 GPS satellites orbiting the earth, in a time span of 12 hours. Of these 27 satellites 24 are currently operational and the rest 3 are reserved for when the others fail.

The device carrying a GPS system comprises of a GPS module which receives the signals and is also responsible for calculating the co-ordinates. Based on function, GPS trackers can be of three types – Data logger, Data pusher or Data puller.

Data logger: It is basically used to log the position of a device at regular intervals. It uses an internal memory to store data.  It also comes with a memory card slot or internal flash memory and USB ports. The data from the device can only be moved to a computer for further analysis once data recording is complete as it can only be used for logging purposes.

Data Pusher:The GPS system which schools and fleet companies use these days belongs to the category of data pushers. Besides this, it can also be used for asset tracking and personal tracking. A data pusher records data like speed, altitude etc. and pushes them to a server where the further analysis of these data can be done.

When used for tracking school buses, text messages are sent to a mobile phone that has a GPS tracking app installed, in the event of school bus arrival or the student boarding the bus, via SMS or GPRS. It can also transmit location and telemetry input data or when an event takes place like a door open/close or geo-fence border crossing or engine ON/OFF.

Data puller: In this a remote system sends an SMS to get information from a GPS device. It is similar to a data pusher but the difference is that the data from the GPS system is sent only when it is requested by the remote server. It requires internet and GPSD only occasionally. These systems are used in situations where a constant source of energy is unavailable.

Why use GPS?

  • Not only does it allow data recording and transmission, but it does this in real-time. It is highly accurate and gives a precise location of your assets.
  • Buses follow pre-defined optimized routes set by school authorities, which reduces fuel consumption and also travel time. Hence, it is becoming more popular with schools and fleet companies.
  • It has helped to reduce pollution since the buses take the shortest routes possible and are well maintained.
  • Helps to monitor the school bus driver’s driving pattern.

RFID is another technology, which along with GPS improves asset or personal tracking. The radio frequency it sends out can be used to transmit information using the GPS system. Student ID cards using RFID’s embedded on them can be used while entering or exiting buses. The information thus generated can be sent to parents via a GPS connection therefore informing the parents whether the student has boarded the bus or not.

Parents Happy With the Installation of GPS in School Buses

Parents won’t always be free to take their child to school and take them back to home. Therefore, they have to depend on school buses to send their children to school. Almost all the schools now provide this transportation facility; either bus or some other vehicles. But all parents are concerned with the safety of their children. How can you ensure the safety of your child in their way to school? Global Positioning System (GPS) will help you to ensure the security.

Soon, the Government will make it mandatory for all school managements to install global positioning system (GPS) in school transport vehicles and parents are quite happy with this decision. Many schools already have GPS systems with tracking and monitoring system with equal involvement of parents and management.

With the increase in number of assault cases against children in school hours, parents are much worried about their safety. With the installation of GPS tracking system in the school buses, parents and school authorities can be sure of the travel route of the students and they will be informed in case any untoward incident takes place.

Advantages of GPS Tracking System

• Real- time information
Undoubtedly, one of the most advantageous features of GPS Tracking System is real-time information that one received about the location of the school bus. It helps you to know where the buses are, monitor pick up and drop off. You will be informed if any bus goes in a wrong route or if there is any unscheduled stop or delay.

• Student safety
Get notified if a student gets into a wrong bus or steps out at a wrong station. Even if the student misses his/her station, the parent will be informed. The exact location of the child can be identified with RFID tags attached to the devices.

• Monitoring the speed, managing the route and scheduling
If the vehicle is moving at a high speed, you will be informed and you can warn the school authorities to control it to avoid accidents. The authority can rely upon RFID school management software. The software can do routing and scheduling automatically. In that way, time and energy needed for rescheduling and re-routing can be saved.

• A solid record
It is possible for the school authorities to record all the activities and route of the school bus using the GPS tracking system.

What is there to worry?

The number of children abducted on their way to school and to home is increasing rapidly. Majority of the kidnapped children were found dead or had been missing. This is a dangerous situation. You cannot always have your children by your side. So finding a reliable solution to this is a necessity.
Edsys’ School bus Tracking System is a reliable solution to tackle this problem effectively. This will make parents really happy because it is so easy to use and syncs with the Parent Portal.

Once installed in your smart device having internet connection Parent Portal gives the following information:

• The travel history of their child at any given time
• A confirmation whether their children has reached school or home
• Monitor speed of school bus
• Time duration at each stop
• The reasons of delay such as break down, traffic jams, natural hazards etc.

Notifications can be enabled as per needs. For example, few minutes before the bus reaches in the morning, when the student boards the bus, when the student misses the bus or when the student reaches home etc.
The installation of GPS tracking systems with RFID software will surely reduce the number of crimes and attacks against students. Even if a child is abducted, it makes it easy for the authority to find the missing child with minimum time. Since the safety of the child is the major concern, the installation of a GPS tracker will make the parents really happy.